ABM 3020 Stop Tailpiece - Aluminium Version
The ABM Tailpiece's classic, slender design makes it an elegant upgrade for your existing guitar tailpiece. It is the perfect accompanying piece to ABM's TOM bridges including the 2040 "Nashville" Roller Bridge.
Milled from Aluminium.
What's in the box:
- 1x Stop Tailpiece
- 5/16" studs and bushings
- Protector box
ABM's 3020 Stop Tailpieces come with 5/16 " sized bushings as provided by the US original tailpieces.
For far-east made guitars, you will likely require the M8 studs (ABM 30208).
In regular installations, do not replace the existing sleeves from the guitars. If you do not have a corresponding tool, this action can be difficult. The sleeves are usually lacquered in and so removing them can result in lacquer cracking. ABM's bushings have a standard outer diameter of 13mm. This can greatly vary in an existing guitar (between 11mm up to 13mm) so do check compatibility first.
Make sure to use an ABM stud with an ABM tailpiece! Third party studs may cause problems with installing the tailpiece.
